Fuel Oil Specialties
Preferred Utilites provides you with a complete offering of Fuel Oil Components.
Tank High Alarm Switch - Model HLS
Model HLS Tank Fil-A-Larm is used on light fuel oil storage tanks to reliably activate a potential overfill warning signal
Features
- Buna-N float materials – for a longer lasting and accurate sensor
- May be used with any light fuel oil or clean low viscosity fluid compatible with the brass probe and Buna-N float materials.
- Connection size: 1 ¼” NPT half coupling in the tank shell.
Specifications
Mounting: Fluid Temperature: Fluid Specific Gravity: Fluid Pressure: Electrical:* Switch Action: Electrical Housing: Wetted Parts: UL listed: |
1 ¼" NPT Coupling 180° F Maximum 0.5 minimum 150 psig maximum SPST, 100W at 120 VAC resistive, 20 mAdc 24 Vdc resistive, 8 VA (holding) AC relay coil duty Can be N.O. or N.C.** Cast aluminum, weatherproof, explosion proof Brass probe and Buna-N float Class I Groups C & D |
| Tank Diameter | 80% Warning | 85% Warning | 90% Warning | 95% Warning |
|---|---|---|---|---|
| 4' | 12" | 10" | 8" | 5" |
| 6' | 18" | 15" | 12" | 7" |
| 8' | 24" | 20" | 15" | 10" |
| 10' | 30" | 25" | 19" | 12" |
| 12' | 36" | 30" | 23" | 15" |
Distance between fluid and top of tank inner wall for various "percentage of full" warnings
High Liquid Level Alarm / Control Switch - Model HLS-LF
- Used on Heavier No. 4 to 6 fuel oil grades to provide a simple and reliable means of sounding an alarm
- Explosion proof enclosure for added reliability
Specifications
Mounting: Fluid Temperature: Fluid Specific Gravity: Fluid Pressure: Electrical: Switch Trip: Electrical Housing: Wetted Parts: |
4" NPT half coupling 275° F maximum 0.7 minimum 100 psig maximum SPDT, 10 amps/120VAC, 5 amps resistive 30 VDC specified by customer, maximum length 25 inches Cast aluminum, weatherproof, explosion proof stainless steel, brass, and cast iron |
Ordering Information
Specify Model HLS-LF
Leak Detector Switch - Model RBS
- Detects leakage into day tank rupture basins and double wall piping leak containment systems containing diesel or distillate fuel oils
- For reliability, the switch has redundant vapor and fluid sealing provisions, lever float operated, and magnetically actuated
Specifications
Mounting: Insertion Depth: Fluids: Fluid Temperature: Fluid Specific Gravity: Fluid Pressure: Electrical: Switch Action Can Be: Electrical Housing: Wetted Parts: |
¾" NPT 3 ½" Nominal Water, Light Fuel Oils 150° F maximum 0.65 minimum 25 psig maximum 8 VA Pilot Duty @ 120VAC SPST-N.C./N.O. (depending on installation orientation - switch shown N.O.) Cast Aluminum, NEMA 4 Steel and Nylon 66 |
Ordering Information
Specify Model RBS
Pump Set Leak Detector Switch - Model PS-LDS
- Detects leakage into the base pan of a pump set
- The switch installs easily into a mounting bracket provided, which welds to the side of the pump set base
- The switch is activated by a magnetic float
Specifications
Switch Action: Fluid Temperature: Fluid Specific Gravity: Fluid Pressure: Electrical: Electrical Housing: Wetted Parts: |
SPST, N.C. 250° F maximum 0.75 minimum 300 psig maximum 50 VA maximum Cast Aluminum All Stainless Steel |
Ordering Information
Specify Model PS-LDS
Liquid Level Switch - Model PLS
- Provides up to six independent liquid level switches on one sealed probe up to 72” in length
- May be used with any clean, low viscosity, non-adhering fluid compatible with brass, solder, epoxy and Buna-N
- Used on fuel oil day tanks to control the addition of oil from remote pumps and to alarm at high and low levels
Specifications
Mounting: Fluid Temperature: Fluid Specific Gravity: Fluid Pressure: Electrical*: Switch Action: Housing: Wetted Parts: |
1¼" NPT Coupling 180° F maximum 0.5 minimum 150 PSI maximum 100W at 120 VAC resistive 8VAC relay coil pilot duty Can be N.O. or N.C. Cast aluminum, UL listed Brass probe and Buna-N float |
Ordering Information
Specify Model PLS-[length in inches]-[# of switches]
Fusomatic Electric Cut-off Switch
- Fusomatic Electric Cut-off switch is a thermally actuated safety switch used in combustion installation
- Wired in series with the burner control circuit, a temperature rise to 165F melts the fusible element to open contacts and stop burner firing
- Electrical rating: 9.8 amp., 1/2 HP @ 120VAC
Ordering Information
Specify Catalog Number 13083
Anti-Syphon Valve - Model A
- Reduces fire hazards and prevents oil spills caused by oil being siphoned from the storage tank onto the boiler room floor
- Recommended on all installations where the highest level of oil in storage is above the boiler room floor
- Constructed of heavy bronze material
- Suitable for all grades of fuel, including #6 Oil
- Tight shutoff is assured by the resilient seat material
- UL labeled and listed
Ordering Information
| Model Numbers | Size | Grade Oil | Capacity GPH | Weight lbs. |
Dimensions (inches) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Head Size | |||||||||||
| 5' | 10' | 15' | 20' | A | B | C | D | ||||
| A-270 | A-271 | A-272 | A-273 | 3/8" | 2 | 30 | 1 1/2 | 2 1/2 | 1 1/2 | 1 1/8 | 1 1/4 |
| A-274 | A-275 | A-276 | A-277 | 1/2" | 2 | 30 | 1 1/2 | 2 1/2 | 1 1/2 | 1 1/8 | 1 1/4 |
| A-278 | A-279 | A-280 | A-281 | 3/4" | 4 | 100 | 2 1/2 | 3 3/8 | 1 3/4 | 1 3/4 | 1 1/2 |
| A-305 | A-306 | A-307 | A-308 | 1" | 6 | 300 | 8 3/4 | 5 | 3 1/8 | 3 1/8 | 1 5/8 |
| A-302 | A-283 | A-284 | A-285 | 1 1/4" | 6 | 300 | 8 3/4 | 5 | 3 1/8 | 3 1/8 | 1 5/8 |
| A-303 | A-287 | A-288 | A-289 | 1 1/2" | 6 | 300 | 8 3/4 | 5 | 3 1/8 | 3 1/8 | 1 5/8 |
| A-304 | A-291 | A-292 | A-293 | 2" | 6 | 300 | 8 3/4 | 5 | 3 1/8 | 3 1/8 | 1 5/8 |
| A-294 | A-295 | A-296 | A-297 | 2 1/2" | 6 | 1000 | 23 1/2 | 7 1/2 | 4 1/4 | 3 1/8 | 2 1/2 |
| A-298 | A-299 | A-300 | A-301 | 3" | 6 | 1000 | 23 1/2 | 7 1/2 | 4 1/4 | 3 1/8 | 2 1/2 |
Fusomatic Gate Valve
- Designed to meet code requirements for automatic closing of oil supply lines in case of fire
- Replaceable fusible element melts at 165F, allowing the valve to close tightly
- The valve may be manually opened and closed
Ordering Information
| Catalog Number | Size | Replacement Hand Wheel |
|---|---|---|
| 13362 | 1/2" | 13086 |
| 13081 | 3/4" | 13086 |
| 13082 | 1" | 13087 |
Oil Lever Gate Valve - Model 110
- Provides automatic shut-off of the fuel flow in the event of a fire
- Valve operation is fully mechanical and is independent of the electrical power supply
- Bronze body construction
- Fusible link melts at 165F, allowing the valve to close tightly
Ordering Information
| Catalog Number | Size |
|---|---|
| 13072 | 3/4" |
| 13073 | 1" |
| 13074 | 1 1/4" |
| 13075 | 1 1/2" |
| 13076 | 2" |
| 13077 | 3" |
| add "-S" suffix | Limit Switch Assembly |
| 13088 | Extra Cable/link kit |
| 13084 | Extra link |
Overfill Prevention Valve - Model 61 for Underground Gravity Filled Storage Tank
- Provides a mechanical method of automatic fuel oil shut-off to prevent overfilling of underground storage tank during a gravity filled delivery
- Used on diesel or No.2 fuel oil storage tanks
- EPA Complaint
Specifications
Valve Body: Float: Valve: Seals: Upper and Lower Drop Tubes: |
Cast Aluminum Nitrile rubber, Closed Cell Foam Aluminum Viton Aluminum |
Ordering Information
Model 61 - for tanks buried to 5' of depth, with a maximum inside tank diameter of 8'
Model 61L - for tanks buried to 9' of depth, with a maximum inside tank diameter of 10'
Overfill Prevention Valve - Model 61F-Stop for Aboveground Pumped-in Storage Tank
- Provides a mechanical method of positive fuel oil shut-off to prevent overfilling of above ground storage tanks during a pressurized fill (pump-in fill) delivery
Specifications
Valve Body: Float: Poppet: Cam: Follower: Shaft: Bearing: |
Cast Aluminum Closed-cell Buna-N Cast Aluminum, hard coated Stainless steel Brass CRS zinc plated Sintered bronze |
Ordering Information
Specify Model 61F-Stop
Relief Valve - Model R
- Designed to relieve excess pressure in lines containing any grade of fuel oil
- Suitable for use with water and air
- Constructed of heavy bronze material
- Valve is suitable for pressures up to 300 psig at 300F maximum
Ordering Information
| Catalog Numbers | Rated Capacity-GPM* | |||||
|---|---|---|---|---|---|---|
| 5-35 psi | 25-100 psi |
75-300 psi |
Size | 50 inlet psig |
70 inlet psig |
115 inlet psig |
| 13040 | 13041 | 13042 | 1/2" | 10 | 12 | 15 |
| 13043 | 13044 | 13045 | 3/4" | 13 | 16 | 21 |
| 11695 | 13046 | 13047 | 1" | 17 | 20 | 26 |
| 13048 | 13049 | 13050 | 1 1/4" | 23 | 28 | 37 |
| 13051 | 13052 | 13053 | 1 1/2" | 30 | 36 | 47 |
| 13054 | 13055 | 13056 | 2" | 50 | 60 | 79 |
| 13057 | 13058 | 13059 | 2 1/2" | 67 | 80 | 105 |
| 13128 | 13129 | 13130 | 3" | 94 | 112 | 147 |
Vacuum Breaker - Model VB
- Provides a simple, dependable means to relieve unwanted vacuum which may develop in a closed piping system or vessel
- Brass body construction
- The device is suitable for pressures up to 300 psig and 365F, and opens to relieve unwanted pressure with less than 2” Hg
Ordering Information
| Model Numbers | Pipe Thread Size | Outlet Pipe Size | "L" Length |
|---|---|---|---|
| 11829 | 1/2" | 3/8" | 1 3/8" |
| 11826 | 3/4" | 1/2" | 2 1/8" |
| 11827 | 1" | 3/4" | 2 3/8" |
| 11828 | 1 1/2" | 1 1/4" | 3 1/16" |
Fire Safety Gas Shut-off Valve - Model 110G
- Provide automatic shut-off of fuel gas flow in the event of a fire
- Valve operation is fully mechanical and independent of the electrical power supply
- Fusible link melts at 165F, allowing the valve to close tightly
Specifications
Valve Body & Bonnet: Adapter: Stem: Safe Working Pressure: Max Pressure Differential: |
Aluminum Zinc plated brass 303 stainless steel 50 PSI 5 PSI |
Ordering Information
| Catalog Number | N.P.T | F | H | L | P | S | W |
|---|---|---|---|---|---|---|---|
| 11745 | 1/2 | 3/16 | 4 3/8 | 2 3/4 | 3 13/16 | 3 9/16 | 7 61/64 |
| 11746 | 3/4 | 3/16 | 4 13/16 | 3 5/16 | 4 | 3 3/4 | 2 23/64 |
| 11747 | 1 | 17/32 | 7 5/32 | 5 | 5 27/32 | 5 19/32 | 2 11/32 |
| 11748 | 1 1/4 | 17/32 | 7 5/32 | 5 | 5 27/32 | 5 19/32 | 5 3/8 |
| 11749 | 1 1/2 | 17/32 | 7 5/32 | 5 | 5 51/64 | 5 21/32 | 5 3/8 |
| 11750 | 2 | 39/64 | 7 3/4 | 6 3/32 | 6 1/4 | 6 | 5 3/8 |
| 11751 | 2 1/2 | 29/32 | 9 61/64 | 7 51/64 | 7 5/8 | 7 3/8 | 6 5/16 |
| 11752 | 3 | 29/32 | 9 61/64 | 7 25/32 | 7 5/8 | 3 9/16 | 7 61/64 |
Single Poppet Foot Valves - Model 900
- Designed to keep the suction line “Primed” by preventing the flow of oil back into the tank when the pumps are not in operation
- Brass body construction
- Provide long dependable service with light oils through No. 4 fuel oil
Ordering Information
| Catalog Number |
Size | O.D. | Height |
|---|---|---|---|
| 13060 | 1/2 | 1 1/4 | 27/8 |
| 13061 | 3/4 | 1 9/16 | 2 11/16 |
| 13062 | 1 | 1 7/8 | 2 9/16 |
| 13063 | 1 1/4 | 2 11/16 | 4 1/4 |
| 13064 | 1 1/2 | 2 1/16 | 4 1/4 |
| 13065 | 2 | 3 1/6 | 4 5/8 |
| 13066 | 3 | 4 7/16 | 6 1/8 |
Double Poppet Foot Valve - Model 22
- Provides double protection against the loss of pump prime
- The poppets and seats are lapped-in for tight closure
- Bronze body and poppet construction
- Provide long dependable service with light oils through No. 4 fuel oil
Ordering Information
| Catalog Number | Size | O.D. | Height |
|---|---|---|---|
| 22 | 1 1/2" | 2 11/16" | 6" |
| 22-2 | 2" | 3 3/4" | 6 5/8" |
Foot Valve Extractor Fitting
- Permits easy removal and reinstallation of the Poppet Foot Valves (Model 900 and Model 22) sizes smaller than 1 ½”
- The removable access cap is gasket sealed to prevent loss of prime due to air leakage
Specifications Bottom Thread Top Thread: Inlet: Outlet: |
4" NPT for connection to tank entrance fitting 4" for a riser pipe to grade (if required) 1½" NPT suction stub 1½" NPT |
Ordering Information
Specify Foot Valve Extractor Fitting, Model 233-FV
Back Pressure Regulating Valve - Model BQ (Recommended for Lower Flow Rates)
- Self-operated spring-loaded back pressure regulating valve
- The valve passes oil to the return line in order to maintain a constant supply pressure to the fuel metering valves
- Suitable for all grades of fuel, including No. 6 oil
- Cast iron body construction
- 390 GPH maximum capacity (for light oil)
Ordering Information
| Catalog Number | Size | Spring Range PSI | Set Pressure PSI | Gallons per Hour | ||
|---|---|---|---|---|---|---|
| Oil Viscosity, SSU | ||||||
| 35 | 300 | 750 | ||||
| 11825 | 1/2" | 2 to 30 | 3 | 61 | 48 | 43 |
| 11665 | 1/2" | 5-15 psi | 5 | 243 | 216 | 190 |
| 11666 | 1/2" | 10-25 psi | 10 | 369 | 324 | 285 |
| 11664 | 1/2" | 20-75 psi | 20 | 605 | 540 | 511 |
| 11667 | 1/2" | 76-150 psi | 65 | 888 | 792 | 696 |
| 11668 | 1/2" | 150-300 psi | 150 | 1314 | 1171 | 1028 |
Back Pressure Regulating Valve - Model V ( Recommended for Higher Flow Rates)
- Self-operated spring-loaded back pressure regulating valve
- The valve passes oil to the return line in order to maintain a constant supply pressure to the fuel metering valves
- Suitable for all grades of fuel, including No. 6 oil
- Cast iron body construction
- 2800 GPH maximum capacity (for light oil)
Ordering Information
| Catalog Number |
Size | Spring Range PSI |
Set Pressure PSI |
Gallons per Hour | ||
|---|---|---|---|---|---|---|
| Oil Viscosity, SSU | ||||||
| 35 | 300 | 750 | ||||
| 12784 | 1" | 0.1 to 5 | 3 | 900 | 750 | not rec. |
| 12763 | 1" | 5 to 20 | 15 | 1500 | 1250 | 1000 |
| 12764 | 1" | 20 to 80 | 50 | 1350 | 1100 | 900 |
| 12765 | 1" | 30 to 150 | 100 | 2500 | 2000 | 1750 |
| 12765 | 1" | 30 to 150 | 125 | 2800 | 2200 | 1850 |
Pressure Reducing Valve - Model O
- Self-operated spring-loaded pressure reducing valve.
- The valve senses down stream pressure to maintain a constant supply pressure to the fuel metering valves
- Cast iron body construction
Ordering Information
| Catalog Number | Size | Spring Range psig |
|---|---|---|
| 11840 | 1/2" | 0 to 10 |
| 11841 | 1/2" | 10 to 50 |
| 11842 | 1/2" | 40 to 100 |
| 11843 | 1" | 0 to 10 |
| 11844 | 1" | 10 to 30 |
| 11845 | 1" | 30 to 130 |
Tank Selector Valve
- Provides a simple and efficient way to select one of two fuel oil storage tanks
- Movement of a single lever transfers both the supply and return lines from one tank to the other while providing an uninterrupted path for supply to the pump set and return from the loop
- Eliminates the potential overflow hazard inherent in pumping from one tank while returning to the other tank
- Eliminates the danger of blocking the return path from relief valves and positive displacement pumps while changing tanks
- Optional electric actuator for automatic lever movement is available
- Cast iron body construction
Ordering Information
Flanged Connection Ordering Information
| SIZE | A | B | C | D | E | F | G | H | Catalog Number |
|---|---|---|---|---|---|---|---|---|---|
| 1 1/2 | 5 | 5 5/8 | 6 3/8 | 1 1/8 | 4 15/16 | 4 7/16 | 6 5/8 | 7 7/8 | 13038 |
| 2 | 6 | 6 5/8 | 6 3/4 | 1 1/8 | 6 1/4 | 5 3/4 | 7 1/16 | 9 5/16 | 13126 |
| 2 1/2 | 6 1/2 | 6 5/8 | 7 3/4 | 1 11/16 | 6 1/2 | 6 1/8 | 7 1/16 | 10 13/16 | 13035 |
| 3 | 7 | 6 15/16 | 7 3/4 | 1 11/16 | 6 7/8 | 5 5/8 | 7 1/16 | 11 3/8 | 13036 |
| 4 | 10 1/2 | 4 15/16 | 10 1/4 | 4 10/16 | 9 | 6 5/8 | 7 11/16 | 12 1/16 | 13037 |
Select catalog number from the tables above. To add optional plug material, add the appropriate suffix:
-S for Sure-tite (1¼” and larger valves only)
-T for Teflon coated cast iron (1¼” and larger valves only)
-B for Bronze
Threaded Connection Ordering Information
| SIZE | A | B | C | D | E | F | Catalog Number |
|---|---|---|---|---|---|---|---|
| 3/4 | 2 5/8 | 3 7/8 | 2 5/8 | 1 1/8 | 2 5/8 | 2 5/8 | 13030 |
| 1 | 2 5/8 | 3 7/8 | 2 5/8 | 1 1/8 | 2 5/8 | 2 5/8 | 13031 |
| 1 1/4 | 3 3/4 | 6 3/4 | 2 3/4 | 1 11/16 | 3 3/4 | 3 3/4 | 13032 |
| 1 1/2 | 3 3/4 | 6 3/4 | 2 3/4 | 1 11/16 | 3 3/4 | 3 3/4 | 13033 |
| 2 | 5 7/8 | 6 3/4 | 3 13/16 | 3 | 5 7/8 | 5 7/8 | 13034 |
| 2 1/2 | 5 7/8 | 6 3/4 | 3 13/16 | 3 | 5 7/8 | 5 7/8 | 13127 |
Select catalog number from the tables above. To add optional plug material, add the appropriate suffix:
-S for Sure-tite (1¼” and larger valves only)
-T for Teflon coated cast iron (1¼” and larger valves only)
-B for Bronze
Horizontal Spill Container - Model 2
- Provides containment for any oil spilled when disconnecting the delivery fitting at the building outside wall
- Includes a three point latch locking handle that protects fill lines from damage, vandalism, or unauthorized access
- NEMA 4 rated moisture proof enclosure
- Stainless steel or Carbon steel materials
- 3.5 US gallons total leak containment
Ordering Information
| Style 1 = | Includes 24”W x 24”H x 12”D cabinet, kamvalock fitting (dry disconnect) and kamvalock dust cap |
| Style 2 = | Includes Style 1 features plus an alarm silence pushbutton, overfill light and door mounted FA-S “Fil-A-Larm” sign. A weatherproof bell is also included (shipped loose) |
| Style 3 = | Includes Style 2 features plus an integral explosion-proof alarm horn. This consolidates all instrumentation associated with the style 2 system within the confines of the spill container |
| Style 4 = | Includes Style 3 features plus a digital display of tank volume |
Ground Level Spill Container - Model 1
- Designed to catch any oil spilled during disconnecting the delivery fitting
- Prevents the oil spill from entering the soil near the fill terminal and is allowed to drain directly into the tank
- Optional suction hand pump allows removal of the unwanted overflow completely
- Ramped, drain slotted, cast iron body ring protects the spill container from a heavy driveway traffic and surface water
Specifications
Cover: Body Ring: Bellows: Gravel Shroud: Lower Body: Drain Valve: Clamps: Seals: |
Aluminum Cast Iron, epoxy coated Low Density Polyethylene High Density Polyethylene High Impact composite Acetal, Polypropylene Stainless Steel Buna-N |
Ordering Information
| Description | Catalog Number |
|---|---|
| 5 gallon, slip on | 1-05 |
| 5 gallon, thread on with drain | 1-05A |
| 15 gallon, slip on (NYC Fire Dept. Approved) | 1-15 |
| 15 gallon thread on with drain | 1-15A |
| Optional hand pump | 11280 |
Watertight Flush Fill Caps - Model W
- One piece, rust-resistant, galvanized cast iron body, with a gasket sealed solid bronze cover for a waterproof seal
- Screw onto the threaded end of fill line to provide full diameter access to the tank through a watertight termina
- When the fill line is exposed to the weight of heavy vehicles, it should be protected by the Model 126A Street Box
Ordering Information
| Catalog Number | Threads | O.D. | Height | Weight |
|---|---|---|---|---|
| 11820 | 2" | 3 1/2" | 2 3/8" | 2 1/4 lbs |
| A-933 | 3" | 4 1/2" | 2 3/8" | 3 1/4 lbs |
| A-934 | 4" | 6 1/4" | 2 1/2" | 5 1/4 lbs |
| 13122 | 6" | 8 1/4" | 2 5/8" | 12 lbs |
| 13099 | 8" | 3 5/8" | 3 5/8" | 24 lbs |
Watertight Locking Fill Caps
- Prevents unauthorized fuel storage tank access when the fill line of the underground tanks extend above ground level
- Solid cast iron body with malleable iron hasp, with gasketed brass cover to provide waterproof seal
Ordering Information
| Catalog Number | Threads |
|---|---|
| 13112 | 2" |
| 13113 | 3" |
Sidewalk Boxes
- Designed to be set flush in a concrete sidewalk
- Provides easy access to fill and/or sounding line terminals, valves, meters and similar equipment which is installed below grade
- Cast iron body with a hinged cover equipped with a latch
Ordering Information
| Catalog Number | Box Sizes | |
|---|---|---|
| Inside | Outside | |
| 13070 | 6 1/2" x 6 1/2" | 11" x 11" |
| 13071 | 12" x 12" | 16" x 16" |
Street Boxes - Model 126A
- Designed to set flush in a concrete pad at grade
- The Street Boxes are not attached to the line from the tank, preventing any weight transfer from any vehicle to the underground tank
- Cast iron body and cover with chrome tanned leather gasket for a tight seal
- The terminal inside the box should be sealed by using a Model W Fill Cap which should be screwed directly onto the fill and/or sounding line
Ordering Information
| Catalog Number | Type 126A Street Box Sizes | ||||
|---|---|---|---|---|---|
| Accommodates Type W Fill Cap |
I.D. | O.D. | Height | Weight | |
| 13103 | 3" | 6" | 8" | 6" | 16 lbs. |
| 13104 | 6" | 9" | 11 1/2" | 6" | 29 lbs. |
Storage Tank Monitor Access Manhole - Model TG-MH-18
- Designed to set flush on a concrete pad at grade
- Because the Manhole is not attached to the tank, it eliminates the possibility of weight transfer from any vehicle to the shell of the tank
- Provide access as required to equipment such as tank gauging and leak detection equipment
- Cast iron body with 3/8” steel cover and a 12” skirt
Ordering Information
Specify Model TG-MH-18
Overfill Alarm Station - Model FA-AV
- Designed to be located near the tank fill terminal to notify of a potential overfill condition
- It triggers a high level alarm that alerts the filling operator that the tank is filled to its predetermined capacity
- The visual alarm is highly visible even in direct sunlight
- A digital display of tank volume is also available as an option
Specifications
Enclosure: Audible Alarm: Visual Alarm: Alarm Silence Button: Alarm Test: |
12"W x 12"H x 6"D, NEMA 4 construction 4" 92 db bell Lens 3 1/4"H, 4 3/8" Dia. with 40 Watt bulb Silences Bell (auto time-out also) Verifies flashing alarm light(s) and bell |
Ordering Information
Standard Unit FA-AV: Available for 1, 2, or 3 tanks
Order FA-AV-[1, 2, or 3 (number of tanks)]-D3
To add Gallons Display Unit: order FA-AV-[1, 2, or 3]-R-D3
Breather Caps
- Provide rugged, maintenance-free terminal protection for breather lines from sumps, reservoirs, and a wide assortment of industrial applications
- Cast aluminum construction
- Brass mesh screens prevents the entry of airborne seeds, dust, bugs, etc.
Ordering Information
| Catalog Number | Pipe Size |
|---|---|
| 00335 | 3/4" |
| 00334 | 1" |
| 00333 | 1 1/4" |
| 00332 | 2" |
| 2684 | 2 1/2" |
Vent Protector
- Conforms to standards for the installation of Oil Burning Equipment (NFPA 31)
- Cast aluminum or iron construction
- Brass mesh screens prevents the entry of airborne seeds, dust, bugs, etc.
Ordering Information
| Catalog Number |
SIZE Inches |
O.D. Inches |
WEIGHT Pounds |
MAX. TANK Capacity* |
Materials |
|---|---|---|---|---|---|
| 13115 | 1 1/4 | 2 3/4 | 1/2 | 500 gals.* | Iron |
| 13116 | 1 1/2 | 4 | 3/4 | 3,000 gals.* | Iron |
| 11741 | 2 | 4 | 1 | 10,000 gals.** | Aluminum |
| 13118 | 2 1/2 | 4 3/4 | 3 | 20,000 gals.** | Iron |
| 11739 | 3 | 5 3/4 | 3 | 35,000 gals.** | Aluminum |
| 11740 | 4 | 7 | 3 1/2 | ------------- | Aluminum |
Tank Vent Brick
- Designed as a terminal for vent lines from storage tanks when the line is run inside the building walls
- The face of the Tank Vent Brick is the same measurement as a standard masonry brick
- One-piece aluminum casting body
Ordering Information
| Pipe Size | Catalog Number |
|---|---|
| 2" | 13079 |
| 3" | 13080 |
Simplex Oil Strainers - Model 72
The Model 72 Oil Strainer is a heavy-duty single basket strainer for general use. It is suitable for installation in either pump suction or discharge lines, provided a temporary shut down for cleaning is possible
- Special yoke design for quick cleaning
- Large basket
- Gray iron construction
For strainer pressure drop data
Ordering Information
The catalog numbers listed in the table below come standard with 3/64" perforated baskets. Add "M" for 40 mesh baskets or "-100M" for 100 mesh baskets.
| Catalog Number |
Pipe Size |
A | B | C | D | E | F |
|---|---|---|---|---|---|---|---|
| 13000 | 1/2" | 4" | 6 5/8" | 2 7/8" | 4" | 2 3/8" | 11" |
| 13002 | 3/4" | 5 3/8" | 8 3/8" | 4" | 5" | 3 1/16" | 13" |
| 13004 | 1" | 5 3/8" | 8 3/8" | 4" | 5" | 3 1/16" | 13" |
| 13005 | 1 1/4" | 6 3/4" | 9 7/8" | 4 7/8" | 5 7/8" | 3 7/8" | 14" |
| 13007 | 1 1/2" | 7 3/8" | 11" | 4 7/8" | 7 1/8" | 4" | 16" |
| 13009 | 2" | 10 1/2" | 13 3/4" | 6 3/4" | 7 5/8" | 5 1/8" | 21" |
Duplex Oil Strainers - Model 53
Model 53 Duplex Oil Strainers are ideal for those fuel oil handling systems where the requirement for a continuous supply of oil does not permit interruption of the flow for routine cleaning of strainer baskets.
- No flow interruption for routine cleaning
- 180° handle movement switches baskets
- Handle blocks inadvertent opening of the active side
- One-piece cast iron body
For strainer pressure drop data
Ordering Information
The catalog numbers listed in the table below come standard with 3/64" perforated baskets. Add "M" for 40 mesh baskets or "-100M" for 100 mesh baskets. 60 mesh and 200 mesh are also available. Consult the factory for part numbers.
| Catalog Number | Pipe Size | AF | AT | C | E | F | Weight Threaded (lbs) | Weight Flanged (lbs) | |
|---|---|---|---|---|---|---|---|---|---|
| Threaded | Flanged | ||||||||
| 13350 | --- | ¾" | --- | 5.5 | 5 | 13.38 | 10.5 | 37 | --- |
| 13351 | 13356 | 1" | 6.88 | 5.5 | 5 | 13.38 | 10.5 | 37 | 42 |
| 13352 | --- | 1 ¼" | 6.88 | 7.5 | 6.81 | 17 | 13.25 | 80 | --- |
| 13353 | 13357 | 1 ½" | 9.38 | 7.5 | 6.81 | 17 | 13.25 | 80 | 90 |
| 13354 | 13358 | 2" | 10.63 | 10 | 8.38 | 21.75 | 17.38 | 157 | 167 |
| 13355 | 13359 | 2 ½" | 10.75 | 10 | 8.38 | 21.75 | 17.38 | 157 | 183 |
| --- | 13360 | 3" | 13.5 | --- | 8.88 | 26.5 | 22.75 | --- | 285 |
| --- | 13361 | 4" | 16 | --- | 13.25 | 33 | 24.75 | --- | 389 |
4" Pressure Gauges
- Stainless steel case and shatterproof, heat resistant polycarbonate lenses
- Equipped with pulsation dampening orifice
- Gauge is filled with glycerin to further protect against the harmful effects of vibration and pulsation
Ordering Information
| Catalog Number | Pressure |
|---|---|
| 11131 | 30" mercury; 0 - 15 psi |
| 11135 | 0 - 100 psi |
| 11136 | 0 - 160 psi |
| 11137 | 0 - 200 psi |
| 11138 | 0 - 300 psi |
2.5" Pressure Gauges
- Black steel case and shatterproof, heat resistant polycarbonate lenses
- Gauge is spring suspended to resists the effects of shock, pulsation and vibration
Ordering Information
| Catalog Number | Pressure |
|---|---|
| 11754 | 30" mercury; 0 - 15 psi |
| 11755 | 0 - 100 psi |
| 11756 | 0 - 200 psi |
Oil Thermometer
- Welded stainless steel construction
- The case is hermetically sealed to prevent the entrance of damaging moisture
- The gauge is calibrated from +50 to +300F with a 1% full span accuracy
- Matching thermowell is available
Ordering Information
| Description | Catalog Number |
|---|---|
| Oil Thermometer | 11638 |
| Matching Thermowell | 8187 |